802.11bgn 2.4GHZ Module with u.FL Connector for External Antenna

The RS9110-N-11-22-(xx) module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, RF transceiver with power amplifier, a frequency reference, and an antenna in hardware; and all WLAN protocol and configuration functionality, networking stack in embedded firmware to make a fully self-contained 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host MCU. The module is based on Redpine's 802.11n chipset - RS9110

   Features

• Compliant to 802.11b/g and single stream 802.11n
• Self-contained serial-to-wireless functionality - does not require any host processor bandwidth
• WPA/WPA2-PSK, WEP, TKIP modes of security
• Host interface: UART and SPI, selectable through a hardware pin
• Integrated TCP/IP stack, with option to bypass in SPI mode through software configuration
• Configuration through AT commands and SPI frames
• Integrated antenna, frequency reference, and low-frequency clock
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Single supply 3.1 to 3.6 V operation
• Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

Description :

Download - Product Brief

Download - Datasheet